Automatic Coffee Tamper Function Instruction — CINOART PT2

Pressure And Tamps Adjustment.

From this video, you would know how to adjust the pressure and stamps of PT2 for each Pre-Set button 10kg, 20kg, 30kg.

3 Pre-Set Button(10kg,20kg,30kg),

3 Pre-Set Buttons help to quick switch to the Pre-Set Pressure&Tamps,

Tamps Button(Up/Down),

Press Tamps Button(Up/Down) to adjust the Tamping Times 1, 2 or 3,

Pressure Button(Up/Down),

Press Pressure Button(Up/Down) to adjust the Pressure between 2kg~38kg,

Save&Clean Button(Dn-UP),

Press Save&Clean Button(Dn-UP),

Single press: save changed value(Pressure&Tamps).

Long Press(Clean Model): the tamper disk will going down, And

Long Press again it will going up,

Pressure&Tamps Adjustment,

Step 1: Select one Pre-Set Button(eg:10kg),

Step 2: Adjust the Pressure (2kg~38kg),

Step 3: Adjust the Tamp Times(1,2, or 3),

Step 4: Press Save/Clean Button(Dn-Up) To Save Changes.

Set The Value For 20kg,30kg Button,

Recheck The Pre-Set Value,

Press Each Pre-Set Button to Check Saved Value.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com

Automatic Coffee Tamper CINOART PT2

Record Function instruction,

Active Record Function,

Step 1: Press & hold 10kg button and then press Dn-Up button,

Step 2: Press Up of the Pressure Button when the first number is flash,

Until the number shows 1 0 0 0（Reset 0 0 0 0 to Inactive Record Function),

Step 3: Press Dn-Up Button to save changes,

it means you have active the record function.

How To Check The Records,

Press&hold 20kg button and then press Dn-Up button,

Press Dn-Up to exit.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com

How To Clear The Records,

Press & hold 30kg button and then press Dn-Up button,

Press Dn-Up to exit.

For example,

How to Use Record Function.

First of all You should Active Record Function.

Step 1: Press & hold 10kg button and then press Dn-Up button,

Step 2: Set Number to 1 0 0 0,

If you want to inactive Record Function, reset it to 0 0 0 0.

Step 3: Press Dn-Up to Save Changes.

Tamp Coffee,

Use PT2 to Tamp Coffee Several Times,

Check Records,

Press&hold 20kg button and then press Dn-Up button To check the records. (Press Dn-Up to exit),

In this video, you would see we tamp coffee 3 times, so PT2 records 3.

Clear Records,

Press&hold 30kg button and then press Dn-Up button,

To clear the records. (Press Dn-Up to exit),

We can Press&hold 20kg button and then press Dn-Up button,

To recheck if the records is 0. (Press Dn-Up to exit)

Automatic Coffee Tamper CINOART PT2,

Normally Maintenance.

Step 1: Long Press Save&Clean Button(Dn-UP) Button,

Tamper Disk will going down to the lowest position.

Step 2: Use the tool to dismantle the portafilter supporter.

Step 3: dismantle the GLS-Guide Leveling System

(Tamper Disk, Dynamic balance bowl guide plate, Springs)

Step 4: Clean GLS Items With Brush.

Step 5: Install GLS Items.

Step 6: Long Press Save&Clean Button(Dn-UP).

Tamper Disk will going up to the highest position.

Step 7: Install and Adjust Portafilter Supporter.

Please refer Portafilter Supporter Adjustment video.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com

Automatic Coffee Tamper CINOART PT2

Sleep Mode instruction,

how to Enter Sleep Mode?

Press & hold Down of Tamps button and then press Dn-Up button

to Sleep Mode, all the Functions, LED are off.

How to Exit Sleep Mode?

Press Dn-Up button again to exit Sleep Mode,

The LED and all the Functions are on.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com

Automatic Coffee Tamper CINOART PT2

Portafilter Supporter Adjustment.

Step 1: Release The Screw Of the Portafilter Supporter.

Step 2: Input Portafilter To Adjust The Supporter Position.

Step 3: Adjust The Supporter to The Nearest Lower-Line And Fix it.

Attention: During the fixation, please make sure the balance of the supporter, you can refer to the lines to fix it.

Step 4: Check If The Portafilter Can Be Inputted Easily.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com

Automatic Coffee Tamper CINOART PT2

Segmented Multi Tamp Function Instruction,

You can adjust the first tamp pressures different with 2nd and 3rd tamps.

How Segment Multi Tamp Works?

Put the Portafilter Into PT2.

You would find the number on the screen shows 13 1,

it means the first tamp pressures is 13kg.

And the next twice is 33 2/3,

it means the tamp pressure is 33kg.

How to adjust Segment Multi Tamp?

Here is an example to Active Segment Multi Tamp For 10kg Button.

Step 1: Press 10kg button.

Step 2: Press&hold Down of Tamps Button and then press the Dn-Up button.

Step 3: When the first two numbers are flash, set the Pressure

by press Pressure(Up/Down) button (00 means cancel Segment Tamp).

Step 4: Press Dn-Up to Save Changes.

Active Segment Multi Tamp For 20kg Button.

Press 20kg button first, and then repeat operation to

set the Segment Tamp Pressure for 20kg button.

Active Segment Multi Tamp For 30kg Button.

Press 30kg button first, and then repeat operation to

set the Segment Tamp Pressure for 30kg button.

Check If These Value Saved Successfully for each button(10kg,20kg,30kg).

for 10kg button,

Press 10kg button first,

And then Press&hold Down of Tamps Button and then press the Dn-Up button to check the value on the screen.

If the value is correct.

Press Dn-Up to exit.

For 20kg button,

Press 20kg button, and repeat the operation to check Segment Pressure for it.

For 30kg button,

Press 30kg button, and repeat the operation to check Segment Pressure for it.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com