Automatic Coffee Tamper CINOART PT2

Segmented Multi Tamp Function Instruction,

You can adjust the first tamp pressures different with 2nd and 3rd tamps.

How Segment Multi Tamp Works?

Put the Portafilter Into PT2.

You would find the number on the screen shows 13 1,

it means the first tamp pressures is 13kg.

And the next twice is 33 2/3,

it means the tamp pressure is 33kg.

How to adjust Segment Multi Tamp?

Here is an example to Active Segment Multi Tamp For 10kg Button.

Step 1: Press 10kg button.

Step 2: Press&hold Down of Tamps Button and then press the Dn-Up button.

Step 3: When the first two numbers are flash, set the Pressure

by press Pressure(Up/Down) button (00 means cancel Segment Tamp).

Step 4: Press Dn-Up to Save Changes.

Active Segment Multi Tamp For 20kg Button.

Press 20kg button first, and then repeat operation to

set the Segment Tamp Pressure for 20kg button.

Active Segment Multi Tamp For 30kg Button.

Press 30kg button first, and then repeat operation to

set the Segment Tamp Pressure for 30kg button.

Check If These Value Saved Successfully for each button(10kg,20kg,30kg).

for 10kg button,

Press 10kg button first,

And then Press&hold Down of Tamps Button and then press the Dn-Up button to check the value on the screen.

If the value is correct.

Press Dn-Up to exit.

For 20kg button,

Press 20kg button, and repeat the operation to check Segment Pressure for it.

For 30kg button,

Press 30kg button, and repeat the operation to check Segment Pressure for it.

If you want to know more about Automatic Coffee Tamper, welcome to our website: https://www.beqsx.com